 | ||||||
| ||||
Care and Maintenance
Solid Surface Creations cutting boards have physical properties that will not allow food, dirt, bacteria, or germs to penetrate its surface.
Conventional Cleaning Techniques
Washing with soap and water is usually sufficient to remove surface dirt or stains.
Ammonia based liquid cleaner (not window cleaner) may also be used. Always rinse surface thoroughly and wipe dry.
Drying is an important step, preventing a build-up of soap film or cleaning residue, which can create the appearance of light scratches over time.
Stubborn soap film or cleaning residue build-up in acrylic is easily removed with abrasive cleanser and a Scotch-Brite® pad or a sponge that was provided with your cutting board.
Cleaning Agents
Solid Surface Cutting Boards will not be affected by common household and commercial cleaners such as:
Powdered abrasive cleansers (like Comet®,Ajax® and a burgundy colored Scotch-Brite® pad with water. )
Ammonia
Strong detergents
Oxalic acid solutions
Dilute hydrochloric acid solutions
Dilute trisodium phosphate solutions
Acid drain cleaners may cause surface damage and should not be used
Preventing Damage
Avoid Strong Chemicals
Some chemicals are not compatible with Solid Surface Creations cutting boards.
Avoid surface contact with:
Strong chlorinated solvents
Chloroform
Ketones
Methylene chloride (paint removers)
Very strong acids such as concentrated sulfuric and hydrochloric acids
Acid drain cleaners should not be used.
